The Iso-Aire filtration system is the ideal solution for commercial and healthcare facilities protecting both patients and staff. Iso-Aire was developed to address airborne based infections, such as COVID-19, in a high performance, quiet, and quick to install packaged unit. This unit is available with a UVC sterilization option (99.99% effective).
Cut Sheet – Exhaust System
Cut Sheet – Recirculation System
Cut Sheet – Exhaust & Recirculation
The Trion Hospi-Gard IsoClean is a portable, self-contained high efficiency particulate air (HEPA) filtration system designed to easily and economically create a negative pressure isolation room/environment that will meet OSHA and CDC TB guidelines.
The IsoClean can be used as a positive pressure clean air recirculating system in clinics, waiting rooms, hospital emergency rooms and other confined areas or as a partial or complete exhausting system to create a negative pressure isolation room for possible use with patients known or suspected of having TB, SARS or other infectious diseases.
Now available in two cabinet sizes:
The Price Room Air Purifier (RAP) is an ideal option for improving indoor air quality wherever and whenever you need it, particularly in high density areas like office spaces, classrooms, fitness centers, retail and restaurants. It is designed to continuously cycle air through a HEPA filter, eliminating unwanted dust particles, germs and contaminants.
Available with UV and ION options to further help reduce airborne pathogens.
Through the use of NPBI, GPS products help improve indoor air quality (IAQ) by reducing airborne particles including certain odors, viruses and bacteria without producing harmful levels of ozone or other byproducts.
Big Ass Fans now offers their Haiku destratification fan with UV-C air disinfection technology. Seamlessly integrated on top of the fan, a UV-C fixture directs light upward creating a disinfection zone near the ceiling. As the fan assists with room destratification, pathogens are brought through the disinfection zone halting the spread of disease.
The Haiku fan is the perfect solution for common spaces including classrooms, libraries, lecture halls, foyers, and offices.
Airius Fans have the option to be ordered with a PHI cell internal to the fan. This factory installed HE/UV light is targeted on a quad metallic target that produces hydroperoxides which kill 99% of bacteria, viruses, and mold on surfaces and 85% of VOCs and odors. The 5” cell is to be used with a short nozzle Airius Air Pear or Designer Series fan.
The Powerfoil-D, Powerfoil X3.0 and the AirEye fans are now available with Ion Technology, part of Big Ass Fans’ innovative Clear Air System. Using powerful airflow and integrated needlepoint ionization, these fans with Ion Technology eliminates airborne pathogens and safely neutralizes odors and allergens without producing harmful ozone.
Cut Sheet – AirEye
Cut Sheet – Powerfoil D
Cut Sheet – Powerfoil X3.0
Airborne infectious isolation rooms (AIIR) are used for patients with easily communicable airborne disease. When there is a shortage of AIIR, existing patient rooms (or temporary care facilities) that can be converted to temporary negative pressure isolation rooms using Fan Filter Units.
Fan Filter Units offer flexibility for facilities requiring negatively or positively pressured and/or filtered spaces.
Available with an optional translucent LED perforated face.
Price Industries has developed a pandemic-ready fan filter unit designed specifically for any room requiring negative pressure or additional filtration such as school nurse stations and hospital isolation rooms.
Combining a translucent LED perforated face on one side and a radial one-way diffuser on the other, this unit can simultaneously exhaust, HEPA filter and supply air to any office, classroom or healthcare facility. Designed to fit into a drop ceiling, requiring only two 24×24 tiles, this unit is the fastest way to ensure and maintain healthy indoor air conditions.
Filter exhaust air with no additional pressure drop. The booster unit is designed to drop into existing duct work and provide filtration to exhaust air before returning to the air handler. The unit is equipped with a built-in fan which compensates for the filter pressure drop, resulting in zero pressure drop through the unit. This is an excellent option if the central air handler cannot accept a higher rated filter.
It is important to understand how airflow measurement can be utilized to maintain minimum levels of outdoor air as well as help control the impact of energy recovery and their potential re-circulation of volatile organic compounds, including viruses.
ERV with Desiccant Wheel
This is accomplished by measuring the airflow on both the supply and exhaust sides of an energy recovery wheel. Ensuring that the supply air pressure is greater than the exhaust air side will prevent the transfer of pathogens back into the fresh supply air stream.
AHU with Economizer Cycle
This is accomplished by measuring the minimum outdoor airflow and controlling dampers to ensure that we maintain desired outdoor air levels.
EBTRON Gold Series Airflow Measurement Devices with an optional RH sensor can provide an output for %RH, enthalpy, or dewpoint.
Many of our clients are looking for ways to reduce risk of spreading airbourne pathogens via cross-contamination in energy recovery wheels. Positively pressurizing the supply airstream to keep the return air on its own side helps, but does not eliminate the problem of the virus sticking to moisture and transferring through the wheel.
Greenheck can help by providing RVE units to include UV-C lights. See attached example of an RVE-40 with indirect gas and Packaged DX with HGRH. In this case, there is no elimination of coils to make room for the lights, which are placed right after the HGRH coil.
With the addition of UV-C light to Powered Aire air curtains, we can now improve safety by helping to eliminate the spread of airborne bacteria and viruses.
These devices are capable of removing up to 99.9 percent of the airborne Coronavirus/COVID-19 pathogens passing through the air curtain.
Powered Aire’s UVC-Aire is available in a stand-alone unit or as a retrofit extension for preinstalled units. The UVC-Aire is also effective against airborne pathogens, bacteria, and other forms of the SARS virus, as well as MRSA.
Of further benefit, the higher the volume of air recirculated through the air curtain, the cleaner it becomes. Multiple passes mean a greater reduction of germs.
Retrofit filtration attachments include a 2” filter and a secondary diffuser face and are suspended directly below existing diffusers so that ductwork changes are not required. Held in place between the t-bar ceiling grid and the original diffuser, this attachment forces air from the original diffuser through a filter before being discharged through the secondary diffuser face. These retrofit filtration attachments protrude 6” from the ceiling providing a visual reminder of the additional precautions taken to provide air cleanliness. Filters are accessible from the room side, by sliding the filter in or out of the side access panel.
Diffusers with ceiling-access filters have a 6” plenum box and are installed on top of the t-bar ceiling grid, replacing existing diffusers. These diffusers have integrated filters that require access to the ceiling plenum for periodic replacement. Filters are slid in or out of this diffuser though a hinged access door on the side of the unit.
Diffusers with room-side accessible filters have a 6” plenum box and are installed on top of the t-bar ceiling grid, replacing existing diffusers. As the name implies, room-side replaceable filters provide convenient access to the filter from the room side for periodic filter replacement. These filters make use of a gel seal on the filter frame and a knife edge flange on the diffuser to create a reliable seal that prevents filter bypass. Filters are available in MERV 13/15 for at lest 95% viral particle removal or HEPA for 99.99% filter efficiency.
The Touchscreen Room Pressure Monitor (PMT) is the most advanced pressure monitor on the market. Designed specifically to meet the needs of Compounding Pharmacies, Isolation Rooms, and Operating Rooms, the PMT provides single or multi-room pressure monitoring while utilizing industry-first maintenance-free pressure sensors.
PresSura Monitors and Controls are the system of choice for hospital room pressure monitoring. For over 30 years, hospitals, laboratories, and cleanroom facilities have chosen TSI products for monitoring of their critical environments. TSI products are online in isolation rooms, protective environments, operating rooms, and other controlled areas. PresSura Room Pressure Monitors and Controls are also extremely effective for laboratory monitoring and cleanroom monitoring. By accurately measuring room pressure differential, ventilation rates (air changes per hour), temperature, and humidity, TSI products control the spread of contaminants in applications that matter.
The CENSus-C100 is a unique solution for reliable and cost effective occupancy counting. Designed for single width interior doors or openings. Multiple counters can be installed on rooms with more than one entry.
Need assistance with a specific application and don’t know where to turn? Our team of technical engineers can assist you in applying the appropriate product for your application.